Find the parts used in the video on CarParts.com just there https://carparts.solutions/MKZGen1 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Multi-purpose grease - Penetrating oil: https://carparts.solutions/PenetratingOil - Sway bar end link: https://carparts.solutions/RearSwayBarEndLinks_MKZGen1 - Bushing: https://carparts.solutions/RearSwayBarBushings_MKZGen1 💪 TIGHTENING TORQUES - Sway bar end link bolt and nut: 15 Ft-lbs - Sway bar brackets holding bolts: 19 Ft-lbs - Wheel lug nuts: 100 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Lincoln MKZ: https://carparts.solutions/ToolBox List of the tools we used to replace the Rear Sway Bar End Links on a Lincoln MKZ: - Hydraulic jack - Jack stands: https://carparts.solutions/JackStands - 17 mm wrench - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - 14 mm socket - 5mm Allen socket - Wire brush Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2006 Lincoln MKZ - 2007 Lincoln MKZ - 2008 Lincoln MKZ - 2009 Lincoln MKZ - 2010 Lincoln MKZ - 2011 Lincoln MKZ - 2012 Lincoln MKZ 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2006 - 2012 Lincoln MKZ safely? ⬆ 🚗 : https://youtu.be/4IBtbA4xvjA ⚠️ CARPARTS.COM'S INFOS - The rear end link connects the sway bar to the chassis to keep the wheels firmly on the ground at all times. - The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to jack your MKZ 0:22 Remove the upper ball joint 0:52 Remove the lower bolt 1:03 Remove the link 1:51 Install the new sway bar end link 2:22 Screw the nut and bolt back in + tightening torques 2:57 Put your MKZ on the ground

Aug 12, 2026 · Youtube

Learning to drive manual: 😭. Driving manual: 😍.

Aug 11, 2026 · Tiktok

Find the parts used in the video on CarParts.com just there https://carparts.solutions/FUSIONGen2 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Cabin filter: https://carparts.solutions/CabinAirFilter_FUSIONGen2 💪 TIGHTENING TORQUES - No tightening torques for this operation 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford Fusion: https://carparts.solutions/ToolBox List of the tools we used to replace the Cabin Air Filter on a Ford Fusion: - Car trim removal tool - Ratchet - Phillips screwdriver - 7 mm socket - Extender - Vacuum Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2013 Ford Fusion - 2014 Ford Fusion - 2015 Ford Fusion - 2016 Ford Fusion - 2017 Ford Fusion - 2018 Ford Fusion - 2019 Ford Fusion - 2020 Ford Fusion 📽 🛠 USEFUL VIDEOS 🛠 📽 No relevant videos related to this operation ⚠️ CARPARTS.COM'S INFOS - Before putting in the new filter in place, it is important to clean out any impurities or leaves stuck in the filter compartment. - Pay attention to the direction of airflow. The arrows on the filter should point down. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:12 Access the cabin air filter 1:07 Remove the filter 1:27 Clean 1:40 Put the filter back 2:00 Put the glovebox back in

Aug 10, 2026 · Youtube

Find the parts used in the video on CarParts.com just there https://carparts.solutions/MKZGen1 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Shock: https://carparts.solutions/RearShocks_MKZGen1 - Penetrating oil: https://carparts.solutions/PenetratingOil - Silicone grease - Copper grease 💪 TIGHTENING TORQUES - Shock absorber upper retaining nut: 76 Ft-lbs - Shock mount retaining bolt: 30 Ft-lbs - Upper control arm inner holding bolt: 74 Ft-lbs + 90 degrees - Upper control arm lower outer bolt: 52 Ft-lbs - Shock absorber base retaining nut: 85 Ft-lbs - Wheel lug nuts: 100 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Lincoln MKZ: https://carparts.solutions/ToolBox List of the tools we used to replace the Rear Shocks on a Lincoln MKZ: - Hydraulic jack - Jack stands: https://carparts.solutions/JackStands - 15 mm wrench - 18 mm wrench - Crowbar - Measuring tape - Wheel lug wrench - Sheet of paper - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - Large flat head screwdriver - 14 mm socket - 15 mm socket - 18 mm socket - Wire brush - Mallet - Extender Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2006 Lincoln MKZ - 2007 Lincoln MKZ - 2008 Lincoln MKZ - 2009 Lincoln MKZ - 2010 Lincoln MKZ - 2011 Lincoln MKZ - 2012 Lincoln MKZ 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2006 - 2012 Lincoln MKZ safely? ⬆ 🚗 : https://youtu.be/4IBtbA4xvjA ⚠️ CARPARTS.COM'S INFOS - In order to change the rear shocks on your vehicle, it is necessary to remove the rear upper control arm. - The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier. - To avoid damaging the bushings, tighten the upper arm control bolts in the “vehicle on the ground” position. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + measure the distance between the center of your wheel and the wheel arch 0:20 How to pull up your MKZ 0:30 Disengage the upper control arm from the wheel knuckle 1:03 Remove the shock base bolt 1:24 Remove the control arm retaining bolt 1:43 Remove the shock mount bolts 2:09 Remove the shock from the mount 3:15 Install the new shock into the mount + tightening torque 4:28 Install the assembly + tightening torque 5:04 Put the upper control arm back in 6:02 Tighten the rear upper control arm holding bolts + tightening torques 6:39 Tighten the shock foot bolt + tightening torque 7:03 Put your MKZ on the ground

Aug 9, 2026 · Youtube

Find the parts used in the video on CarParts.com just there https://carparts.solutions/FUSIONGen2 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Battery: https://carparts.solutions/Battery_FUSIONGen2 - Copper grease 💪 TIGHTENING TORQUES - No tightening torques for this operation 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford Fusion: https://carparts.solutions/ToolBox List of the tools we used to replace the Battery on a 1.5 Ecoboost Ford Fusion: - 10 mm wrench - Cylindrical brush - Ratchet - 8 mm socket - Extender - Sandpaper - Vacuum Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2013 1.5 Ecoboost Ford Fusion - 2014 1.5 Ecoboost Ford Fusion - 2015 1.5 Ecoboost Ford Fusion - 2016 1.5 Ecoboost Ford Fusion - 2017 1.5 Ecoboost Ford Fusion - 2018 1.5 Ecoboost Ford Fusion - 2019 1.5 Ecoboost Ford Fusion - 2020 1.5 Ecoboost Ford Fusion 📽 🛠 USEFUL VIDEOS 🛠 📽 No relevant videos related to this operation ⚠️ CARPARTS.COM'S INFOS - Always remove the (black) negative terminal ("ground") first. - When reinstalling the battery, always put the positive (red) terminal back in first. - Once the terminal has been removed, ensure you distance the cable to avoid untimely reconnections which could damage the electrical network of the vehicle. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:11 Remove the battery clamp 0:29 Disconnect the battery 1:00 Remove the battery + prepare to install the new one 1:16 Install the new battery 1:42 Reconnect the battery 2:03 Put the battery clamp back

Aug 8, 2026 · Youtube

Our little XJ's interior has seen over 200k miles and I think its time to give it some love without breaking the bank! I turned to @Carpartscom and the brand CoverKing to make sure these seatcovers fit perfectly. Theres nothing I dislike more than baggy, unflattering seat covers and man did they deliver the opposite! Check out @Carpartscom and use DISCOUNT CODE: NATASHA20 for 20% off your next seat covers! #CarPartsPartner #xj #seatcovers #coverking

Aug 7, 2026 · Instagram

Ever wondered how we get you access to over 1.5 million parts? Take a house tour of one of our DCs. 👀 #carpartscom #distributioncenter #housetour

Aug 6, 2026 · Instagram

Ever wondered how we get you access to over 1.5 million parts? Take a house tour of one of our DCs. 📷 #carpartscom #distributioncenter #housetour

Aug 5, 2026 · Tiktok

Your brakes are one of the few things standing between “close call” and “too late.” If your car’s been making noise, vibrating, or stopping differently than usual, don’t brush it off. Check out these 5 signs your brake system may need attention and save this post for the next time your car starts acting suspicious. 🛑

Aug 4, 2026 · Facebook

Find the parts used in the video on CarParts.com just there https://carparts.solutions/FUSIONGen2 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Brake discs: https://carparts.solutions/FrontBrakeDiscs_FUSIONGen2 - Brake pads: https://carparts.solutions/FrontBrakePads_FUSIONGen2 - Threadlocker: https://carparts.solutions/Threadlocker - Brake cleaner: https://carparts.solutions/BrakeCleaner - Copper grease 💪 TIGHTENING TORQUES - Slide pins: 22 Ft-lbs - Brake caliper mount bolts: 111 Ft-lbs - Wheel lug nuts: 100 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford Fusion: https://carparts.solutions/ToolBox List of the tools we used to replace the Front Brakes on a Ford Fusion: - Hydraulic jack - Jack stands: https://carparts.solutions/JackStands - Brake wind-back Tool: https://carparts.solutions/BrakePistonTool - Clamp - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - 18 mm socket - 7mm Allen socket - Hammer - Wire brush - Cloth - Clamp or iron wire - Paper towels Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2013 Ford Fusion - 2014 Ford Fusion - 2015 Ford Fusion - 2016 Ford Fusion - 2017 Ford Fusion - 2018 Ford Fusion - 2019 Ford Fusion - 2020 Ford Fusion 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2013 - 2020 Ford Fusion safely? ⬆ : https://youtu.be/KdcqYYzCRPA - How to replace front brakes, rotors and pads (Complete guide) 🚘 : https://youtu.be/zTMADtYhnlg ⚠️ CARPARTS.COM'S INFOS - Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other. - Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat. - When replacing brake discs, you also need to replace the brake pads. This is a mandatory procedure. - Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads. What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective." 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to jack your Fusion 0:19 Remove the brake caliper 1:23 Remove the pads 1:35 Remove the caliper mount 1:50 Remove the rotor + clean the wheel hub 2:02 Prepare the new rotor 2:18 Put the new rotor back + Clean the caliper mount 2:28 Put the caliper mount back + tightening torque 2:54 Prepare the installation of the new pads 3:35 Insert the new brake pads 3:48 Put the caliper back + tightening torque 4:12 Safety tips 4:30 Put your Fusion back on the ground 4:41 Tips

Aug 3, 2026 · Youtube

Find the parts used in the video on CarParts.com just there https://carparts.solutions/MKZGen1 Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Brake discs: https://carparts.solutions/RearBrakeDiscs_MKZGen1 - Penetrating oil: https://carparts.solutions/PenetratingOil - Brake pads: https://carparts.solutions/RearBrakePads_MKZGen1 - Brake caliper: https://carparts.solutions/RearBrakeCaliperD_MKZGen1 and https://carparts.solutions/RearBrakeCaliperP_MKZGen1 - Brake cleaner: https://carparts.solutions/BrakeCleaner - Copper grease 💪 TIGHTENING TORQUES - Slide pins: 19 Ft-lbs - Brake caliper mount bolts: 52 Ft-lbs - Disc holding bolt: 10 Ft-lbs - Banjo bolt: 18 Ft-lbs - Wheel lug nuts: 100 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Lincoln MKZ: https://carparts.solutions/ToolBox List of the tools we used to replace the Rear Brake Calipers on a Lincoln MKZ: - Hydraulic jack - Jack stands: https://carparts.solutions/JackStands - 12 mm wrench - 13 mm wrench - 14 mm wrench - 17 mm wrench - Crowbar - Banjo shutter pliers - Wheel lug wrench - Torque wrench: 20 to 250 Ft-lbs https://carparts.solutions/TorqueWrench_20-250 100 to 600 Ft-lbs https://carparts.solutions/TorqueWrench_100-600 - Ratchet - Flat head screwdriver - 13 mm socket - Torx T40 socket - Lineman's pliers - Hammer - Wire brush - Cloth - Paper towels - Pin punch Don't forget to subscribe: https://www.youtube.com/@CarPartscomOfficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2006 Lincoln MKZ - 2007 Lincoln MKZ - 2008 Lincoln MKZ - 2009 Lincoln MKZ - 2010 Lincoln MKZ - 2011 Lincoln MKZ - 2012 Lincoln MKZ 📽 🛠 USEFUL VIDEOS 🛠 📽 - How to jack your 2006 - 2012 Lincoln MKZ safely? ⬆ 🚗 : https://youtu.be/4IBtbA4xvjA - How to bleed the Brake Fluid System 2006 - 2012 Lincoln MKZ 🚗 : https://youtu.be/ND_upzdcd-k ⚠️ CARPARTS.COM'S INFOS - Here’s a tip! You can limit brake fluid leakage during this operation by plugging both sides of the banjo bolt with banjo shutter pliers. - When replacing a brake caliper, you need to bleed the brake fluid system to remove air from the system. - Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro + how to jack your MKZ 0:21 Loosen the banjo bolt 1:03 Slightly retract the pistons 1:18 Remove the caliper from the mount 2:10 Remove the caliper mount 2:42 Remove the rotor + clean the wheel hub 3:04 Install the new rotor 3:28 Put the brake caliper mount back + tightening torque 4:55 Put the brake pads back 5:38 Put the brake caliper back + tightening torque 6:11 Screw the brake hose back + tightening torque 7:20 Bleed the brake fluid system 7:39 Put your MKZ on the ground 7:54 Tips

Aug 2, 2026 · Youtube

Finding the right part shouldn’t feel like a guessing game. On CarParts.com, you can add your vehicle’s year, make, model, and trim right at the start and we filter the results to show parts that are designed to fit your specific car. That means less scrolling, fewer compatibility questions, and more confidence before you check out. The benefit? Better fitment, fewer returns, and a smoother install process. Get started via CarParts.com!

Aug 1, 2026 · Facebook